產品品牌：康明斯Cummins 產品型號：PCC3100 產品認證CE  供應康明斯Cummins PCC電腦控制系統PCC控制系統線路維修,調試,安裝 A31A32A33A34A35A36A37A38  Introduction to the PowerCommand Control 3100This lesson presents an overview of the PowerCommand Control 3100 components used on200-1500 kW generator sets built after August 5, 1994.ObjectivesAfter completing this lesson, you should be able to:• Identify the PowerCommand Control 3100.• Locate and identify the PowerCommand Control 3100 front panel switches andcomponents.• Identify the PowerCommand Control 3100 internal modules.• Identify the PowerCommand Control 3100 external modules. What is the PowerCommand Control 3100(PCC 3100)(R)The PowerCommand 3100 Control is partof a networkable PowerCommand systemthat can incorporate gensets, transferswitches, paralleling systems, and customers’equipment and their SCADAsystem.It is used as the “Standard” control on all200-1500 kW gensets with hydro-mechanicalfuel systems since August 5,1994. This control has a microprocessorand stored information for each generatorset kW and frequency selection. This customizedsetup of the control is done at thetime the generator set is run in the testcell. What does the PowerCommand Control3100 do?In addition to the many control and annunciationfunctions of the Detector-Series ofcontrols, the PCC 3100 controls the automaticvoltage regulator and governorfunctions. In the PCC 3100, the AVR andgovernor are related because the samemicroprocessor controls both of them.Besides operating the engine, the PCC 3100also monitors and displays the generatorvoltage, current, power factor, and loadlevel. If the active or reactive load goesover 95% of the limit for the selectedgenerator set, a warning message will bedisplayed on the LED display panel onthe front of the PCC 3100. If the currentor load goes over 100% of the limit, thePCC 3100 will shut down the generatorset well before the generator is damaged.What are the PCC 3100 remote start modes?The PCC 3100 can wait for a remote startsignal in either the standby or servicemode. In the service mode, the PCC 3100power supplies are operating, and thePCC 3100 will constantly draw currentfrom the generator set batteries. In thestandby mode the PCC 3100 draws muchless current from the generator set batteriesuntil a “wake-up” signal is received.